Patton electronics 3092, Administrator'S Reference Manual

Page: 130 / 162

18 • T1/E1 Link
! "#
128
&
Introduction
The
686 - %
window (see figure 45) shows the configuration of the T1/E1 Interface, and reports
statistics on the quality of the T1/E1 connection. The statistics listed in this section comprise those contained
in RFC 1406—Definitions of Managed Objects for the DS1 and E1 Interface Types.
$ ,<>'686 - % ( (
Click on
686 -
under the
! , 4
to display the
686 - %
main window.
The
686 - %
main window contains the following items:
• Information that identifies the DS1 Interface on a managed device, indicates the type of DS1 line using the
circuit, and shows the transmission vendor’s circuit identifier (see figure 45). For more information about
the objects in this window, refer to “T1/E1 Link Activity main window” on page 129.
• —This variable indicates interface line status. If any condition other than exists, you
can click on the link to view the window. For more information about
these objects, refer to “Line Status (dsx1LineStatus)” on page 130.
•
D! , E
link—clicking on this link takes you to the page that displays the
!
! ,
window. This window contains general information about the DS1 interface, amount of
time intervals passed, and kind of line coding). For more information about this page, refer to “Line Sta-
tus—Configuration” on page 132.
•
D!E
link—clicking on this link takes you to the page that displays line sta-
tistics for the current 15-minute interval. For more information about this page, refer to “Near End Line
Statistics—Current” on page 137.