Patton electronics 3092, Administrator'S Reference Manual

Page: 52 / 162

7 • iDSL Port Configuration
! "#
50
& ,( (
iDSL Port Information Page window
Clicking on any port number in the
! ,
shows port information for a single port
(see Figure 17). The window is divided into , , and
&
&
sections.
$ ,6@' & ,( (
iDSL Port Status
The iDSL port status section displays configuration and current status information for the specified port.
• - This is the same as
!
described above. Shows the
current state of the iDSL modem. The different states are deactivate, initializing, reset, hardware failure,
local loop-back, remote loop-back, data mode, and line down.
•
! 2 &3 !
The total time which the iDSL modem has been connected with
the CPE's remote modem. This value is given in Time Ticks.
The iDSL port connected time is a timer to count how long the iDSL post has been connected to the far-
end unit.
•
$!2!&3
- The total number of times which the iDSL modem circuit has
flapped. One flap occurs after the iDSL modem circuit has gone down and back up. If this number