Patton electronics 3092, Administrator'S Reference Manual

Page: 40 / 162

5 • DS0 Mapping
! "#
38
&
Introduction
One of the remote locations is the CPE’s iDSL modem. The second remote location is typically connected
through some WAN port’s time slots. For communication between these remote locations they shall be con-
nected together within the DACS. These connections are configured in the DS0 mapping window.
The following types of internal connections are available:
• Between an iDSL modem and time slots in a WAN port
• Between two iDSL modems
• Between time slots within the same or between different WAN ports
Displaying the DS0 Mapping window
Do the following:
1. Click on
C4 ,
under the
! , 4
. The
C4 ,! ,
window displays
(see figure 13).
$ ,6:'C4 ,! , ( (
The following sections describe the contents of the
C4 ,! ,
window.
DACS Display Type
You can configure or map the static connections by using the Long Format or the Command Line Format.
• displayLongForm(0)—This is the easiest to use by selecting the options from the pull-down menus.
• displayCliForm(1)—If you prefer the command line format, select displayCliForm(1) and click on the Sub-
mit Query button. Consult the following sections for the format of the command line.