Patton electronics 3092, Administrator'S Reference Manual

Page: 37 / 162

4 % D! , , %
35
! "#
4 • Alarms
Major Alarm SNMP Trap IP [address] (majorSyslogPriority)
This parameter functions in the same manner as the Minor Alarm SNMP Trap IP [address] except it applies to
major alarms. Upon the occurrence of a major alarm, an SNMP Trap message is sent to a host system (or a
management station). This parameter is the IP address of the host running the SNMP Trap daemon. When the
IP address is set to 0.0.0.0 no SNMP Trap message will be sent.
Temperature Threshold
An alarm message is generated when the internal box temperature exceeds this threshold value (degrees Cel-
sius). You can change the threshold temperature, but we recommend that you use the factory default.
Modify Alarms—Configuring alarm severity levels
Clicking on
4 %
window (see figure 12) displays a table listing each individual alarm. From this
page you can configure the severity for each alarm (such as major, minor, major self-clearing, and minor self-
clearing). Each alarm can be disabled as appropriate for your application.
$ ,67'4 % ,( (