![background image](http://html1.mh-extra.com/html/patton-electronics/1195-4e1/1195-4e1_getting-started-manual_4024594035.webp)
General Commands
After entering into the application program for CLI commands, press the “?” key in the command line to
get the list of the commands.
Command
Description
?/help
To get a list of commands for the system
showmac
View MAC address
showip
View the IP address
showmask
View the subnet mask
showgw
View the gateway
showsnmpget
View the GET/GETNEXT community of SNMP
snowsnmpset
View the SET community of SNMP
setsnmpget
Configure the GET/GETNEXT community of SNMP
setsnmpset
Configure the SET community of SNMP
setip
Configure the IP address
setmask
Configure the subnet mask information
setgw
Configure the gateway information
setmac
Configure the Ethernet MAC address
showsysinfo
View the system information
sete1loop
Enable/Disable the loopback of the E1 port
showe1loop
View if the E1 port is looped back
e1alarm
View the alarms of E1 tributary
setcvmode
Configure the receive mode of the laser port
showlaser
View the current status of the laser port
reset
Perform a hot restart
setdefault
Configure the settings as default
enableport
Enable/Disable the Ethernet port
setport
Configure the Ethernet port
showport
View the Ethernet port configuration
ethperform
Clear the perform counter data
ethstatus
View Ethernet status
clearperform
Clear the perform counter data
adduser
Add a manager to TELNET
deluser
Delete a user from TELNET
showuser
View information of the TELNET manager
showrpd
View the status of remote system power detroy alarm
sete1mask
Configure the alarm mask of the unused E1 interface
showe1mask
View the configuration of unused E1’s alarm mask
clearcv
Clear the record of E1’s CV alarm
settonemask
Configure the status of the alarm tone mask
showtonemask
showcontact
View the status of alarm tone mask
View the contact details
General Commands
35
Model 1195 Getting Started Guide
5 • CLI configuration