Pattfield PE-EMH 2400, Manual

Page: 120 / 126

EN 120
Circuit breaker
The appliance features a circuit breaker that is
activated under the following circumstances:
- Too much shredding material around the
blades.
- Too much shredding material for the motor
capacity.
- Too much resistance against the blades.
If the circuit breaker has activated, switch off
the appliance, remove its plug and take the
following steps:
1. Remove the feeder unit 9 by loosening the
reamer knob 3 .
2. Clean the cutting area from obstructions
and let the motor cool down for a view
minutes.
3. Reinstall the feeder unit 9 and tighten the
reamer knob 3 .
4. Reconnect the appliance to the power sup-
ply and press the circuit breaker 4 button.
5. To continue shredding, use the main
switch 10 to switch the appliance on.
Warning! Never open the reamer
knob while the machine is running
or still connected to the power supply.
Care & Maintenance
Caution! Make sure the appliance is
switched off and unplugged.
- Always keep the appliance clean, dry and
free of oil or grease.
- Wear safety glasses and gloves to protect
your eyes and hands whilst cleaning.
- For safe and proper working, always keep
the machine and ventilation slots clean.
- Regularly check for obvious defects and/or
damaged components.
- Periodically check all fixings. These could
become loose with time due to vibration.
- The most used part is the blade. Inspect the
blades regularly:
- If the blade is worn or blunt, it must be
replaced immediately.
- If the appliance starts to vibrate exces-
sively, the blades seem to be unbalanced
and must be replaced.
- Replace any worn or damaged parts.
- If the body of the appliance needs cleaning,
wipe it with a brush or a soft damp cloth. A
mild detergent can be used but nothing like
alcohol, petrol or other cleaning agent.
- Never use caustic agents to clean plastic
parts.
- Lubricate all moving parts at regular inter-
vals.
- Store the appliance in a dry place and out of
the reach of children.
Caution! If the supply cord is dam-
aged, it must be replaced by the
manufacturer or its service agent or
similarly qualified person in order to
avoid hazard.