Pattfield PE-EMH 2400, Manual

Page: 119 / 126

EN 119
CIRCUIT BREAKER
In case of overload, the circuit breaker 4
trips to prevent the machine from dam-
age. See section Circuit breaker for
further information.
1
EXTENSION CORD
Clamp the extension cord into the cord
hook 11 .
1 Plug the power cord 6 into the exten-
sion cord.
2
REPLACING THE BLADES
Remove the feeder unit 9 by loosening
the reamer knob 3 . Turn the appliance
around.
1 Unscrew the 8 screws of the aluminium
guide to remove it.
2
Caution! Only use extension cables
intended for outdoor use and not
lighter than 1,5 mm 2 .
PLUNGER
Only use the plunger 1 to push smaller
material down to the blades.
1
Turn the blades 180° and reinstall them
or install new ones.
Reassemble the appliance in reverse
order.
4 Use a screwdriver to lock the blade disc
and remove the blades using a 6 mm
hex key.
3
Caution! Always wear protective
gloves when handling the blades.
Caution! Make sure the appliance is
switched off and unplugged.
Caution! Do not mix used and new
blades!
Use a wall socket with a Residual
Current Device (RCD) with a tripping
current of not more than 30 mA.
Warning! Never use the appliance
without feeder unit installed.