Pattfield PE-EMH 2400, Manual

Page: 118 / 126

EN 118
INSTALL THE STAND
Attach the stand 13 to the motor unit 5
as shown and secure it using the two
screws.
1 Slide the wheel axle 7 through the
holes in the stand 13 . Install the
washers, the wheels 14 and secure
with the splints on both sides.
Click the wheel covers in place.
2
Using the machine
1. Inspect the material to be shredded before
starting. Remove any objects that are not
suitable for shredding or could entangle
the blades [metal parts, stones, bottles,
cans, etc].
2. Place the appliance on a firm level ground
and do not move it during operation. Make
sure the reamer knob 3 is securely tight-
ened.
3. Use the main switch 10 to switch the ap-
pliance on and wait until the motor has
reached full speed.
4. Insert the shredding material into the in-
take opening 8 , but do not overload the
appliance.
5. Make sure the shredded material can fall
freely from the discharge chute 12 .
6. Use the plunger 1 to push smaller material
down to the blades.
7. Regularly clean your workspace from
shredded material.
Warning! Only use the plunger in
order to push material down to the
blades.
Caution! Make sure the appliance is
switched off and unplugged.
Intended use
The appliance is intended for shredding of
wooden and fibrous garden waste for compost
purposes, like:
- Twigs and Branches up to a ø of 40 mm.
- Waste from trimming and pruning bushes
and hedges.
- Plant materials like leaves, roots and other
garden waste.
Any other use or modification to the appli-
ance is considered as improper use and could
cause considerable dangers.
The appliance is not intended for commercial
use.
Product overview
1 Plunger
2 Main handle
3 Reamer knob
4 Circuit breaker
5 Motor unit
6 Power cord
7 Wheel axle
8 Intake opening
9 Feeder unit
10 Main switch
11 Cord hook
12 Discharge chute
13 Stand
14 Wheels
Caution! Before start using the ap-
pliance, check the protective devices
and fastening elements for damage.
Do not use the appliance if it is damaged.