EN
124
EN
125
Technical Data
Nominal voltage
230 - 240 V~ 50 Hz
Rated power
1200 W
No-load speed (n
0
)
5200/min
Blade
165 x 20 x 2.6 mm-24T
EN 847-1
Max. cutting depth (Wood)
90° = 56 mm / 45° = 42 mm
5 mm less when using guide rails
Tooth size
2.6 mm
Bevel degree
0 - 45°
Protection Class
/ II
Weight
4.8 kg
Sound pressure level (L
pA
)
89 dB(A) / Uncertainty K = 3 dB(A)
Sound power level (L
WA
)
100 dB(A) / Uncertainty K = 3 dB(A)
Max. vibration emission (a
hw
)
< 2.5 m/s
2
Only use saw blades that correspond with the specifications given above.
The values given are valid for nominal voltages U of 230 V. For lower voltage and models for
specific countries, these values may vary.
Please observe the article number on the type plate of the tool. The trade names of the individual
tool may vary.
Noise & Vibration
The declared vibration total value and the de-
clared noise emission values have been meas-
ured in accordance with a standard test meth-
od (EN 62841) and may be used for comparing
one tool with another. The declared vibration
total value may also be used in a preliminary
assessment of exposure.
Warning!
The vibration and noise
emission during actual use of the
power tool can differ from the declared to-
tal value depending on the ways in which
the tool is used, in particular, what kind of
work piece is machined.
Warning!
It is necessary to identify
safety measures to protect the op-
erator that are based on an estimation of
exposure in the actual conditions of use
(taking account of all parts of the operating
cycle such as the times when the tool is
switched off and when it is running idle in
addition to the trigger time).
Try to minimize the impact of vibration and
noise. Exemplary measures to reduce vibra-
tion exposure include wearing gloves while
using the tool, limiting working time, and us-
ing accessories in good condition.
Dust collection system
Use of dust collection can reduce dust-related
hazards.
To prevent personal injuries, make sure to
connect a suitable vacuum cleaner to the dust
extraction port
14
. The port is capable of a
connector of
35 mm
.
Care & Maintenance
Caution!
Make sure the tool is
switched off and unplugged.
- Always keep the tool clean, dry and free of
oil or grease.
- Wear safety glasses to protect your eyes
whilst cleaning.
- Wear safety gloves to protect your hands
whilst handling the saw blade.
- For safe and proper working, always keep
the machine and ventilation slots clean.
- Regularly check to see if any dust or foreign
matter has entered the grills near the mo-
tor and around the on/off switch. Use a soft
brush to remove any accumulated dust.
- If the body of the tool needs cleaning, wipe
it with a soft damp cloth. A mild detergent
can be used but nothing like alcohol, petrol
or other cleaning agent.
- Never use caustic agents to clean plastic
parts.
- Lubricate all moving parts at regular inter-
vals.
- Periodically check all fixings. These could
become loose with time due to vibration.
Caution!
If the supply cord is dam-
aged, it must be replaced by the
manufacturer or its service agent or simi-
larly qualified person in order to avoid haz-
ard.
Accessory
Caution!
The saw blade shall com-
ply with EN 847-1
- Do not use cracked or deformed saw blades.
- Do not use blades that do not match the
given parameters.
- Take care to properly fix the blade. Check
that the blade turns in the right direction.
Warning!
Replacement parts must
conform with the requirements spec-
ified by the manufacturer. Therefore use
original replacement parts only or spare
parts authorised by the manufacturer.
Aluminium guide rail (70 x 18 cm)
Part no: 5661036
Hex key
Part no: 5661036
Dust adapter (32 mm)
Part no: 5661036
TCT Blade 165 x 20 x 2.6 - 24 T
Part no: 5661036
In case of service requests or spare parts,
please contact your local HORNBACH store or
write an email to: [email protected]
