EN
120
EN
121
Product overview
1
Cutting depth scale
2
Bevel angle clamping knob
3
Bevel angle scale
4
Tolerance adjustment screws
5
Release button
6
Fast fix lever
7
On/off switch
8
Motor housing
9
Power cord
10
Cutting depth clamping knob
11
Guide rails
12
Base plate
13
Handgrip
14
Dust extraction port
15
Saw blade / pre-installed
16
Auxiliary handgrip
17
Spindle lock button
18
Blade guard
Intended use
The tool is intended for sawing longitudinal
and cross cuts in firmly supported solid wood
as well as bevel angles to 45°. The tool is not
intended for commercial use.
Any other use (e.g. abrasive wheels) or modi-
fication to the tool is considered as improper
use and could cause considerable dangers.
The pre-installed saw blade is intended for
use with wood only!
BLADE GUARD FUNCTION
Place the tool on the edge of the work-
piece as shown.
Caution!
Make sure the tool is
switched off and unplugged.
1
Push the release button
5
and push
down the auxiliary handgrip
16
to see
if the blade guard works properly.
Do not use if blade guard is dam-
aged or not working properly.
2
Using the tool
1.
Check the correct function of the blade
guard
18
.
2.
To switch on the tool,first push the re-
lease button
5
, then press and hold the
on/off switch
7
.
3.
Start working when the tool is at maxi-
mum speed. Keep holding it firmly with
both hands. Push the release button
5
forward and slowly push down the aux-
iliary handgrip
16
so that the saw blade
enters the safely fixed workpiece.
4.
Raise the saw blade out of the workpiece
and release the on/off switch
7
to turn off
the tool.
Caution!
Do not overheat the saw
blade tips.
Caution!
If cutting plastic, avoid
melting the material.
Caution!
Wear hearing protection
and if cutting wood, make sure to
wear a dust mask.
Lieferumfang
Etendue de livraison
Materiale compreso nella fornitura
Leveringsomvang
Leveransomfång
Rozsah dodávky
Rozsah dodávky
Volumul livrat
Scope of delivery
DE
SV
IT
SK
FR
CZ
NL
RO
GB
1x
1x
1x
2x
1
2
7
14
5
2
4
16
3
15
1
6
10
9
12
17
13
8
18
1.
1.
2.
2.
11
