Pattfield Ergo Tools PE-3050, User Manual, Page: 148 / 155

EN 148
Product overview
1 On/Off switch (with automatic pressure
switch)
2 Transport handle
3
Pressure gauge (set pressure)
4 Pressure gauge (tank pressure)
5
Air outlet (set pressure)
6 Pressure regulator
7
Air outlet (tank pressure)
8 Pedestal
9
Power cord
10 Condensation drain valve
11
Cooling ribs
12 Oil drain valve
13
Air filter
14 Oil filling hole
15
Overload switch
16 Wheel
17
Pressure tank
18 Safety valve
19
Oil inspection window
Intended use
This compressor is intended for generating
compressed air to operate suitable pneumatic
tools (e.g. tyre inflators, blow-out guns, or
paint sprayers). The tool is only suitable for
operation under supervision.
Any other use or modification to the tool is
considered as improper use and could cause
considerable dangers.
This compressor is not suitable for running
machines with high air consumption (e.g. or-
bital sanders, grinders, impact drivers)
Restriction of use
DO NOT use the compressor:
- for gases other than air,
- in explosive atmospheres,
- for respiratory air (e.g. diving equipment),
- for medical use,
- for the food sector,
- for measuring, control and safety pur-
poses,
- for blow-cleaning clothes
- for commercial, trade or industrial use.
ATTACH AIR FILTERS
Remove the transport plugs and screw
the air filters 13 to the compressor.
Note: Clean the air filters every 50 op-
erating hours: Remove wing screw.
Tap, blow out, and refit the filters. Re-
place the filter elements once a year.
1
ATTACH OIL SEALING PLUG
2
Remove the transport lid of the oil fill-
ing hole 14 , fill in oil (see the respec-
tive section to the right) and screw the
oil sealing plug into the filling hole.
INSTALL THE PEDESTALS
Install the pedestals
8
left and right of
the compressor.
1
INSTALL THE WHEELS
2
Install the wheels
16
left and right of
the compressor.
Setup
Only operate the compressor in dry rooms at
+5 °C to +40 °C.