Integrated Solutions
to Piping Problems
ABERDEEN,
UK OFFICE
+44 (0) 1224 724726
DORDRECHT,
NETHERLANDS OFFICE
+31 (0) 78 6 52 41 11
WOMMELGEM,
BELGIUM OFFICE
+32 (0) 36 00 17 07
patriot-international.com
FOR MORE INFORMATION
HYTORC Nederland BV
h.o.d.n. TorcGUN
| Platinawerf 8 - 6641 TL Beuningen - NEDERLAND | Tel: +31(0)24 - 3 660 660 | www.hytorc.nl
HYTORC Benelux BVBA
h.o.d.n. TorcGUN
| Ysselaarlaan 65B - 2630 Aartselaar - BELGIË | Tel : +32(0)38 - 705 220 | www.hytorc-benelux.be
ENG-Usermanual jGUN air - dual speed plus and wheelgun.docx Version 2.4 / jan-13
6
Always use the Filter Regulator Lubricator (FRL) Unit provided with the jGUN. Never use a
substitute oiler and regulator.
Never change the length of hose from the FRL to the jGUN. A difference in length of the hose can
affect the accuracy and sustainability of the tool.
5.2 Filter reservoir
Before each use, you may empty the filter reservoir of water and contaminations in two ways:
1. Emptying water through the release valve on the underside of the reservoir. To use the release valve,
push the valve until the water or debris drains out of the reservoir.
2. Removal of the reservoir. To remove the reservoir from the FRL Unit:
a. Push down on the black square button to unlock the reservoir.
b. Twist the filter reservoir until the two lines on the FRL body and the filter reservoir are
aligned.
c. Pull the filter reservoir down to detach from lubricator body.
d. Discard the contents of the filter reservoir.
e. Reattach the filter by aligning the lines on the filter reservoir and FRL body, and pushing up on
the reservoir, then twisting the reservoir to lock it in place. The black locking button should snap
into its original position.
Fig. 3: Loosen the reservoir
Fig. 4: Emptying the FRL Filter Reservoir
5.3 Oil reservoir
To lubricate the air supply maintenance set, the oil reservoir needs to be 2/3 filled with oil before each
use. How do you fill the oil reservoir?
1. Push down on the black square button to unlock the reservoir.
2. Twist the oil reservoir until the two lines on the FRL body and the filter reservoir are aligned.
3. Pull the oil reservoir down to detach from lubricator body.
4. Fill the lubricator reservoir with pneumatic tool oil for 2/3.
5. Reattach the filter by aligning the lines on the filter reservoir and FRL body, and pushing up on the
reservoir, then twisting the reservoir to lock it in place. The black locking button should snap into its
original position.
Fig. 5: Filling Oil reservoir
Integrated Solutions
to Piping Problems
ABERDEEN,
UK OFFICE
+44 (0) 1224 724726
DORDRECHT,
NETHERLANDS OFFICE
+31 (0) 78 6 52 41 11
WOMMELGEM,
BELGIUM OFFICE
+32 (0) 36 00 17 07
patriot-international.com
