Integrated Solutions
to Piping Problems
ABERDEEN,
UK OFFICE
+44 (0) 1224 724726
DORDRECHT,
NETHERLANDS OFFICE
+31 (0) 78 6 52 41 11
WOMMELGEM,
BELGIUM OFFICE
+32 (0) 36 00 17 07
patriot-international.com
FOR MORE INFORMATION
HYTORC Nederland BV
h.o.d.n. TorcGUN
| Platinawerf 8 - 6641 TL Beuningen - NEDERLAND | Tel: +31(0)24 - 3 660 660 | www.hytorc.nl
HYTORC Benelux BVBA
h.o.d.n. TorcGUN
| Ysselaarlaan 65B - 2630 Aartselaar - BELGIË | Tel : +32(0)38 - 705 220 | www.hytorc-benelux.be
ENG-Usermanual jGUN air - dual speed plus and wheelgun.docx Version 2.4 / jan-13
8
6. REACTION ARM AND SOCKET INSTALLATION
Fig. 8: Standard reaction arm jGUN
Choose the correct reaction arm for the job. The jGUN is
shipped with a standard length reaction arm, but your gun
may have been ordered with custom-length reaction arm
for a specific purpose.
Do not change the reaction arm for no reason. It may
cause personal injury and damage to the tool. If you
make adjustments to the reaction arm yourself your
warranty is withdrawn. Contact TORCGUN for a custom
made reaction arm.
Fig. 9: Reaction Arm Installed at jGUN
Single Speed
Clean the reaction arm and jGUN square drive mating
surfaces before installing the reaction arm.
Slide the reaction arm onto the jGUN square drive with the
reaction arm extension facing out. Failure to install the
reaction arm correctly could result in the reaction arm
coming in contact with your hand or other another part of
your body, causing personal injury.
Fig. 10: Tightening Reaction Arm Set
Screw
Lock the reaction arm to the jGUN by al aligning the set-
screw with the hole in the splined section and then
tightening the set screw firmly.
Fig. 11: Installing jGUN Socket
Place the appropriately sized socket onto the jGUN square
drive.
Integrated Solutions
to Piping Problems
ABERDEEN,
UK OFFICE
+44 (0) 1224 724726
DORDRECHT,
NETHERLANDS OFFICE
+31 (0) 78 6 52 41 11
WOMMELGEM,
BELGIUM OFFICE
+32 (0) 36 00 17 07
patriot-international.com
