3.5.4 Network Service
3.5.4.1 DHCP Server
Check “Server Enable” to start the DHCP server. If the DHCP function is selected, fill in a related
IP address.
Notice : 1. If CORZA cannot obtain the IP address from DHCP, the system will initiate its own DHCP
function.
2. If CORZA has obtained the IP address from DHCP, you should set “use the static IP mode”
and designate a static IP for CORZA before initiating the DHCP server function.
3.5.4.2 Bonjour
CORZA supports Apple’s Bonjour protocol and iTunes server
* Check “Enable” to initiate the Bonjour protocol.
3.5.5 Maintenance
System maintenance includes: There are six options: disk utility, disk area, firmware update, storage
configuration, restore configuration and factory reset.
3.5.5.1 Disk Utility
Disk information will display hard disk name, file system type, total capacity, used capacity,
cluster configuration and all configured hard disks.
- Encrypt Box
CORZA can perform 128bits loop-AES encryption for Ext2 file format only. To
perform this function, you need to input the 20-character password and format the hard disks
again.
- Format
You can format the hard disks via this key. CORZA supports 3 file formats: Fat32,
Ext2 and Ext3.
User Interface Introduction
29
