3.5.3 System
System setting includes 6 functions: “Network Setting”, “Time Setting”, “Server Startup”, “Information”,
“Disk Capacity” and “Error Notice Setting”.
3.5.3.1 LAN Setting
- Hostname
* You must set an independent name for CORZA over the LAN.
Notice : 1. The number of characters is limited to 15 characters, which must consist only English letters, numeric
numbers or “-”.
2. Since the default host names of CORZA are identical, if you want to install more than 2
CORZA, be sure to change the host name of each CORZA to avoid recognition
error on the IP setting software.
- IP Address Setting
* Obtain IP address automatically
If you have installed the DHCP server, the system will obtain the IP address from the DHCP
server automatically. If the IP address cannot be obtained from DHCP, the default IP address
is 192.168.1.1.
* Use static IP address
You can consult related MIS personnel to obtain the IP address, subnet mask and default gate
and fill them in related fields.
* Obtain DNS server address automatically
The system obtains the IP address of the DNS server from the DHCP server automatically.
* Use static DNS server address
You can consult related MIS personnel to obtain the DNS address and fill it in the related field.
Notice : When CORZA is connected to the network, the system will obtain the IP address automatically
through the DHCP server. In case that the IP address cannot be obtained through the DHCP server,
CORZA will initiate its own DHCP function to become the DHCP server. Confirm the IP
address of CORZA (by default, 192.168.1.1) first and then set the PC to the same LAN to enter
the system login screen.
- Physical Address
* The physical address is displayed as CORZA.
User Interface Introduction
25
