1.2 Click “Setup” and the setting software will detect automatically and present the following result
screen. In case multiple CORZAs are installed over the network, the blank on the left will
display all devices detected.
In this screen, you can learn related IP address of the present server. To change such information of the
server as related IP address, etc, select the name of the server first and then click “OK”.
Notice : If you need to install more than 2 CORZAs at one time, change the host name and IP address
of the first CORZA after installation and setting and then power on the another one to set so as
to avoid system confusion or IP conflict due to simultaneous setting and reduce the possibility of setting
errors.
1.3 After you click “OK” and change the system setting, the system will require you to input the
administrator password. The preset password is “admin”. If you have changed the password, input
the new password.
Corza_Setup Util.exe 37
