Page 5
ASSEMBLY AND INSTALLATION (CONT.):
7. After installing the fixture, caulk the upper 2/3s of the WALL PLATE to the mounting surface.
Leave the bottom 1/3 un-caulked to allow for drainage of any water that might leak into the
enclosure. The manufacturer recommends a non-drying exterior caulking material. A good
example is a clear silicone rubber sealant for exterior use.
8. RESTORE POWER AT THE CIRCUIT BREAKER. Turn on the wall switch.
WHITE
(NEUTRAL)
SUPPLY
WRE
WHITE
FIXTURE
WIRE
BLACK (HOT)
SUPPLY WIRE
BLACK
FIXTURE
WIRE
WIRE
NUT
WALL
PLATE
SUPPLY
GROUND
WRE
OUTLET
BOX
FIXTURE
GROUND
WIRE
HEX
NUT
BRACKET
MOUNTING
SCREW
MOUNTING
BRACKET
FIXTURE
MOUNTING
SCREW
LOCK
NUT
Fig. 1
