- 7 -
PATON
ProMIG series
DC MMA/TIG/MIG/MAG
5
–
Machine operation indicator:
a) permanent green light
–
during stabilization of source operating mode and
MMA welding;
b) permanent yellow light
–
in the operator wait mode during tungsten arc inert
gas welding and semiautomatic welding;
c) blinks green and yellow
–
while welding in any mode;
d) permanent red light
–
in case of malfunction;
e) no light
–
in case of mains voltage rise or drop beyond the normal value.
6
–
Digital seven-segment display of the wire-feeding machine.
7
–
The button of wire leading-in (while gas is not supplied).
8
–
Buttons for adjusting parameters for decreasing and increasing (by default:
wire feeding speed).
9
–
Shielding gas test button (wire feeding is disabled).
10
–
Button for selecting the functions of the wire-feeding machine.
11
–
Socket
KZ‐2
of EURO type for semiautomatic torch connection.
12
–
Plug for power current supply to the
wire‐feeding
machine.
А
–
Power current s
ocket “+”
of bayonet type:
a) in case of MMA welding
–
for connection of electrode cable (very occasionally
“mass”
cable can be connected, if special electrodes are used);
b) in case of TIG welding
–
only “mass” cable is connected
;
c) in case of MIG/MAG solid wire welding
–
a cable is connected internally to the
feeder (by default);
d) in case of semiautomatic MIG/MAG fluxing wire welding
–
“mass”
cable is
connected.
B
–
Power current socket “‐”
of bayonet type:
a) in case of MMA welding
–
for connection of “earth”
cable (very occasionally
electrode cable can be connected, if special electrodes are used);
b) in case of TIG welding
–
only argon torch is connected;
c) in case of MIG/MAG solid wire welding
–
“earth” cable is connected
;
d) in case of semiautomatic MIG/MAG fluxing wire welding
–
“earth”
cable is
connected internally to the feeder (it is possible to attach it independently).
13
–
The input for leading-in welding wire.
14
–
The coil holder for a wire with a spring braking mechanism.
15
–
The input for cable supplying control signals from the wire-feeding machine
to the welding current source.
16
–
Fitting for shielding gas supply.
17
–
On/off automatic device of the source.
