– 20 –
Caution
Check whether the rib of the lens inside of the LED Unit
fi
ts into the groove if the LED Unit does not attach properly. Attach
the LED Unit by referring to the next page if the rib does not
fi
t into the groove as shown in the diagram below.
In addition, the rib may slide out of the groove during removal as shown in the diagram below depending on how the LED
Unit is removed.
Attaching the LED Unit to the product again in this state may result in damage.
LED Unit
Top View
Lens
Groove
Rib
Rib
Groove
Do not remove the LED unit as shown in below.
The rib of the lens will slide out of the groove.
Attaching the LED Unit to the product again in this state may result in damage.
1 Remove multiple
LED units at the
same time.
2 Remove the target LED
Unit from the multiple
LED Units that have
been removed.
The rib of the lens slides
out of the groove.
