– 10 –
8
Detaching the Unit
Follow the procedure below to detach a unit, such as when removing the Buzzer Unit or changing the layout of the LED
Units.
Link to Video
Caution
Be sure that it is disconnected from the power source before working on it.
Do not apply excessive torque
or
strong shock
to each unit or body. Failure to comply will result in damage or
malfunction.
Do not touch the connector area or the inside of the body and LED unit.
Failure to comply will result in damage or
malfunction.
Be sure to lock
each unit securely when attaching. Failure to comply will result in damage or malfunction.
Detach the unit in the following manner. Any other method may result in damaging the product.
Attachment: Attach one unit at a time to the body.
Removal: Firmly hold the bottom section while removing the upper section.
Please attach each unit
from the Body Unit one at
a time.
Units may become
damaged if attached from
the top side.
Notice
The maximum number of attachment units per product are
fi
ve LED units, plus one buzzer unit.
When using the Multi-Color LED Unit LR6-E-MZ for the LR6 (60 mm) Signal Tower, the maximum number of attachment
units per product is one LED unit and one buzzer unit.
When using Wireless Data Acquisition System WD, the maximum number of attachment units per product are three
LED units.
