Patlite LR6-IL, Operation Manual

Page: 7 / 29

– 7 –
6 How to Use
This product is an IO-Link compliant product.
Connect this product by following the “ 5 Wiring” (p. 6).
The controller can light, fl ash or extinguish the LEDs or control the buzzer.
Changing the “Operating Mode” settings enables the following modes:
  Simple Mode
  Advanced Mode
  Simple Mode
This mode performs simple control by only turning ON and OFF each LED and the buzzer.
Other settings are speci fi ed using the parameters.
Send the processed data by referring to the table below.
bit 0 bit 1 bit 2 bit 3 bit 4 bit 5 bit 6 bit 7
Byte 0 data
LED Unit (Red)
ON / OFF
Not used Not used Not used Not used Not used Not used Not used
Byte 1 data
LED Unit (Amber)
ON / OFF
Byte 2 data
LED Unit (Green)
ON / OFF
Byte 3 data
LED Unit (Blue)
ON / OFF
Byte 4 data
LED Unit (White)
ON / OFF
Byte 5 data
Buzzer
ON / OFF
  Advanced Mode
This mode performs advanced control such as lighting, fl ashing, and turning off each LED as well as sounding,
intermittently beeping, or stopping the buzzer.
Other settings are speci fi ed using the parameters.
Send the processed data by referring to the table below.
Enable the intermittent buzzer settings to repeatedly sound the buzzer for 500 ms and stop the buzzer for 500 ms.
Refer to (p. 8) for the pattern of each LED.
bit 0 bit 1 bit 2 bit 3 bit 4 bit 5 bit 6 bit 7
Byte 0 data
LED Unit (Red)
ON / OFF
Not used LED pattern (Red) Not used
Byte 1 data
LED Unit (Amber)
ON / OFF
Not used LED pattern (Amber) Not used
Byte 2 data
LED Unit (Green)
ON / OFF
Not used LED pattern (Green) Not used
Byte 3 data
LED Unit (Blue)
ON / OFF
Not used LED pattern (Blue) Not used
Byte 4 data
LED Unit (White)
ON / OFF
Not used LED pattern (White) Not used
Byte 5 data
Buzzer
ON / OFF
Not used
Intermittent
Buzzer
Not used