®
Technical Support
ME
-
1240 (Red) / ME-1241 (Blue)
7
013-14727B
Maximizing Battery Life
One of the factors that affects battery life is the storage
temperature. Therefore, avoid storing the Smart Cart in
very cold or very hot environments.
Troubleshooting
If the Battery Status LED blinks red, use the micro USB
cable to connect the Smart Cart to a USB port or a USB
charger.
If the Smart Cart battery will not charge, it may need to
be replaced. Contact Technical Support for information
about battery replacement.
Suggested Experiments
Practically any experiment that has a force, acceleration,
linear motion, or rotational motion measurement can be
done with the ME-1240 or ME-1241 Smart Cart. See the
PASCO Web site at
www.pasco.com/products/lab-manuals
for more information about experiments.
Calibrating the Sensors
The Smart Cart is factory calibrated. Further calibration
is not necessary, especially if you are measuring a
change in force, acceleration, or motion rather than
absolute values. However, it is possible to calibrate the
sensors. For detailed information, see Appendix C.
Specifications
*During burst mode, other sensors will be turned off.
Bluetooth distance
30 m (unobstructed)
Technical Support
For assistance with any PASCO product, contact
PASCO at:
The Reference Guide will be updated periodically. For
the latest revision of this Reference Guide, visit the
PASCO Web site at
www.pasco.com/manuals
and enter the product number, PS-3202, in the text
window.
Replacement Parts
For information about replacement parts, contact
Technical Support:
USB Cable, Micro-to-USB A
Hook Attachment
Bumper Attachment
Magnetic Bumper (ME-9885A)
Limited Warranty
For a description of the product warranty, see the PASCO catalog. For
more information visit www.pasco.com/legal
Copyright
This PASCO scientific
Reference Guide
is copyrighted with all rights
reserved. Permission is granted to non-profit educational institutions for
reproduction of any part of this manual, providing the reproductions are
used only in their laboratories and classrooms, and are not sold for profit.
Reproduction under any other circumstances, without the written consent
of PASCO scientific, is prohibited. V: 4/16.
Trademarks
PASCO, PASCO scientific, PASCO Capstone, PASPORT, and
SPARKvue are trademarks or registered trademarks of PASCO scientific,
in the United States and/or in other countries. All other brands, products,
Item: Force
Value
Range
±100 newtons (N)
Resolution
0.1 N
Accuracy
±1%
Maximum sampling rate
500 samples/second
Burst mode sampling rate*
5000 Hz (for 1 second)
Item: Position
Value
Resolution
±
0.2 mm
Item: Velocity
Value
Maximum velocity
±
3 m/s
Maximum sampling rate
100 samples/second
Item: Acceleration
Value
Range
±16g (g = 9.8 m/s
2
)
Maximum sampling rate
500 samples/second
Address: PASCO scientific
10101 Foothills Blvd.
Roseville, CA 95747-7100
Phone:
+1 916 462 8384 (worldwide)
8700-772-8700 (U.S.)
Web:
www.pasco.com/support
Email: