![background image](http://html1.mh-extra.com/html/parsun/f50-bel-d/f50-bel-d_owners-manual_3861848055.webp)
48
6. Start the engine. Flush the cooling system. Perform the flushing and fogging at the same time, as
fogging/lubricating of the engine is mandatory to prevent engine rust.
1. Lowest water level
2. Water surface
CAUTION:
If the fresh water level is below the level of the anti-cavitation plate, or if the water supply is
insufficient, engine seizure may occur.
WARNING
:
Do not touch or remove electrical parts when starting or during the operation.
Keep hands, hair, and clothes away from the flywheel and other rotating parts while the
engine is running.
7. Run the engine at a fast idle for a few minutes in neutral position.
8. Before turning off the engine, quickly spray “Fogging Oil” into the carburetor or the fogging hole of
the silencer cover, if equipped.
9. If “Fogging Oil” is not available, run the engine at a speed higher than idle until the fuel in the fuel
system has run out and the engine stops. Remove the spark plug(s). Pour a teaspoonful of clean
engine oil into each cylinder. Rotate the flywheel several times by hand. Replace the spark plug(s).
10. Drain the fuel from the fuel tank and drain cooling water from the engine completely. Clean the
1
2
Summary of Contents for F50 BEL-D
Page 38: ...31 3 1 Greasing...
Page 67: ...60 7 Circuit diagram BE...
Page 68: ...61 FE...
Page 69: ...62 Remote control box...