Parsun F50 BEL-D, Owner'S Manual

Page: 18 / 69

11
WARNING
：

Loose clamp screws could allow the outboard motor to fall off or move on the transom. This
could cause loss of control. Make sure the clamp screws are tightened securely,
occasionally check the screws for tightness during operation.
3. Secure the clamp bracket to the transom using the appropriate bolts. For details, consult your dealer.
WARNING
：

Avoid using bolts, nuts or washers inappropriate. After tightening, test running the engine
and check their tightness.
2.2 Breaking in engine
Your new engine requires a period of breaking to allow mating surfaces of moving parts to wear in
evenly.
CAUTION
Failure to follow the break-in procedure could result in reduced engine life or even severe
engine Damage.
2. If the engine restraint cable attachment is equipped
on your engine, an engine restraint cable or chain
should be used. Attach to a secure mounting point on
the boat to avoid the engine being completely lost if it
accidentally falls off the transom.