![background image](http://html1.mh-extra.com/html/parsun/f50-bel-d/f50-bel-d_owners-manual_3861848026.webp)
19
2. Ensure the engine oil pressure warning lamp is off.
WARNING
:
1. Engine oil pressure warning lamp
3. Check for steady flow of water from the cooling water pilot hole.
CAUTION:
2.7 Shifting
WARNING
:
Before shifting, make sure there are no swimmers or obstacles in the water near you.
If the lamp keeps flashing after starting the engine, stop the
engine immediately and check the engine oil level. Please fill
the engine oil if necessary. If the problem cannot be corrected,
consult your dealer.
ꞏ If water is not flowing out of the hole at all times while the
engine is running, stop the engine and check whether the
cooling water inlet on the lower case or the cooling water pilot
hole is blocked.
ꞏ If the problem cannot be located and corrected, consult your
dealer.
1
Summary of Contents for F50 BEL-D
Page 38: ...31 3 1 Greasing...
Page 67: ...60 7 Circuit diagram BE...
Page 68: ...61 FE...
Page 69: ...62 Remote control box...