16
Installa
Selecon of installaon equipment
Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installaon and use, a iniuo/B space shall be preserved
around the hole.
Be sure the thickness of the work surface is at least 40-50. Please select
heat-resistant work surfaceerial to avoid larger defoon caused by the heat
radiaon frohe hotplate.
When installing the hob over drawers, a boardust be installed 1Bnderneath the
hob. The boardust beade of suitable heat resistanerials.
A
B
C
D
E
F
564
494
/B
/B
/B
/B
Make sure the hob is well venlated and the air inlet and outlet are not blocked.
Dear Installer:
Please ax data label provided on the adjacent cupboard near
the appliance for future reference. Thank you.
564mm (A)
494mm (B)
50mm mini
(D)
50mm mini
(C)
50mm mini
(F)
50mm mini
(E)
Summary of Contents for HX-2-6NF-CER-T
Page 2: ...727626052018...
