19
Connecng the hob to the mains power supply
The power supply should be connected in copliance with the relevant local standards.
1. If the cable is daged or needs replacing, the operaonust be carried out by a qualied
technician with dedicated tools to avoid any accidents.
2. The installeust ensure that the correct electrical connecon has beende and that it is
copliant with safety regulaons.
3. The cableust not be bent or copressed.
4.
The installeust use the supplied power cord.
Recommended
type of
connection lead
CONNECTION DIAGRAM
Caution! Voltage of heating elements 220-240V
Caution! In the event of any connection the safety
Wire must be connected to the E terminal.
For 220-240V earthed one-phase connection, bridges
connect L terminals and N terminals, safety wire to
(
1
/
①
②
④
⑤
①
②
④
⑤
TERMINAL BOARD
WARNING
Close the cable clamp after making the
electrical connection. Close the
terminal board cover by twisting it down.
Summary of Contents for HX-2-6NF-CER-T
Page 2: ...727626052018...
