18
Inserng and xing the hob
Before inserng the hob into the work surface, place the adhesive seal around the underside edge
of the hob. It isportant tox the seal evenly without gaps, to prevent liquids froeeping
underneath the hob.
1.
Place the gasket around the boSoedge of the hob.
2.
Place the hob in the work surface cutout, so the hob is si`ngrly on the surface.
3.
Secure the hob to the underside of the work surface using thexing brackets
supplied.
Screw one end of the bracket to the holes on the underside of the hob.
Adjust the posion of the brackets to suit the thickness of the work surface.
Secure the other end of the bracket to the underside of the work surface, in order to
secure the hob into posion.
Cauons
The hobust be installed by qualied personnel. Never conduct the operaon by
yourself.
The hob shall not beounted to cooling equipent, dishwashers and rotary dryers.
The wall and induced heang zone above the work surface shall withstand heat.
To avoid any dage, the benchtop and adhesive ust be resistant to heat.
A stecleaner is not to be used for cleaning the product.
1
worktop
2
1
3
4
5
2
screw
3
bracket
4
hob
5
hob seal
a
Worktop
Fixing bracket
Screw
50mm MIN.
Heat outlet
15mm MIN.
Summary of Contents for HX-2-6NF-CER-T
Page 2: ...727626052018...
