8
When you have nished cooking
1. Touch the cooking zone selecon control that
you wish to switch o.
2. Turn the cooking zone o by scrolling down
to “0 “ using the “-“ key on your power regulang control.
The display will then show “H"
3. Alternavely turn the whole cooktop o by touching the control
4. Beware of hot surfaces
“H” will show which cooking zone is sll hot to touch. The signal will disappear when the
surface has cooled down to a safe teperature. It can also be used as an energy
saving funcon - if you want to heat further pans, use the hotplate that is sll hot.
Note: the residual heat indicator will disappear if thein power supply to the hob is turned o.
5. To use the dual cooking zone, touch the cooking zoon zone seleco >
the dual cooking zone sbol
on the control panel.
This will acvate the outer ring of the zone. Use the “-“ or “+” controls to adjust the heang level.
Summary of Contents for HX-2-6NF-CER-T
Page 2: ...727626052018...
