Parkside PWSAP 20-Li D4, Original Instructions Manual

Page: 13 / 250

PWSAP 20-Li D4 ■ 2 │
GB
│
IE
CORDLESS ANGLE GRINDER
20V PWSAP 20-Li D4
Introduction
Congratulations on the purchase of your new tool.
You have selected a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the specified range of applications. Please also
pass these operating instructions on to any future
owner.
Intended use
This tool is intended for cutting and roughing metal,
concrete or tiles without the use of water. Any other
usage of or modification to the tool is deemed to be
improper and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage resulting from improper use. The tool is
not intended for commercial use.
Explanation of the symbols used
Before using the tool for the first time,
read the original operating instructions
and safety instructions.
Using damaged cutting or roughing
discs is dangerous and may cause
serious injury!
Diameter of the disc
Cordless angle grinder
Wear protective goggles!
Wear ear muffs!
Wear safety shoes!
Wear protective gloves!
Wear a dust mask!
Not approved for wet grinding
Not approved for side grinding
Suitable for grinding metal
Features
1
ON/OFF switch
2 Speed control
3
Ready2Connect LED
4 Battery pack*
5
Battery charge level button
6
Battery display LED
7
Release button for the battery pack
8
Additional handle
9
Spindle locking button
0
Screw thread (3 x) for the additional handle
q Mounting ring
w
Screws
e Blade guard fixture
r
High-speed charger*
t Red control LED
z
Green control LED
u
Mounting spindle
i
Mounting flange
o
Clamping nut
p
Two-hole assembly spanner
a
Bulges
s Blade guard
d
Plastic clip
f Protective cover