Parkside PWSAP 20-Li D4, Original Instructions Manual

Page: 14 / 250

PWSAP 20-Li D4
GB
│
IE
│ 3 ■
Package contents
1 cordless angle grinder 20V
1 additional handle
1 blade guard (pre-assembled)
1 protective cover(pre-assembled)
1 roughing disc (pre-assembled)
1 two-hole assembly spanner
1 operating manual
Technical details
Cordless Angle Grinder 20V PWSAP 20-Li D4
Rated voltage 20 V (DC)
Rated speed n 3000–10000 rpm
Disc size Ø 125 mm
Thread size M14
Battery PAP 20 B3*
Type LITHIUM ION
Rated voltage 20 V (DC)
Capacity 4 Ah
Cells 10
High-speed charger PLG 20 C3*
INPUT
Rated voltage 230–240 V ~ 50 Hz (AC)
Rated power
consumption 120
W
Fuse (internal) 3.15 A
T3.15A
OUTPUT
Rated voltage 21.5 V (DC)
Rated current 4.5 A
Charging time approx. 60 min.
Protection class II / (double insulation)
* BATTERY AND CHARGER ARE NOT SUPPLIED
Noise and vibration data
Noise measurement value determined in
accordance with EN 60745. The A-rated noise
level of the power tool is typically:
Noise emission value
Sound pressure level L
PA
= 79.5 dB (A)
Uncertainty K = 3 dB
Sound power level L
WA
= 87.5 dB (A)
Uncertainty K = 3 dB
Wear ear muffs!
Total vibration value
Surface grinding,
main handle
a
h, AG
= 14.128 m/s 2
Uncertainty K = 1.5 m/s 2
Surface grinding,
additional handle
a
h, AG
= 12.720 m/s 2
Uncertainty K = 1.5 m/s 2
NOTE
► The vibration level specified in these instruc-
tions has been measured in accordance with
a standardised measuring procedure and can
be used for tool comparisons. The specified
vibration emission value can also be used to
make an initial exposure estimate.
WARNING!
► The vibration level varies depending on the
use of the power tool and may be higher
than the value specified in these instructions
in some cases. Regular use of the power tool
in this way may cause the user to underesti-
mate the vibration. Try to keep the vibration
loads as low as possible. Measures to reduce
the vibration load are, e.g. wearing gloves
and limiting the working time. Wherein all
states of operation must be included (e.g.
times when the power tool is switched off and
times where the power tool is switched on but
running without load).