Parkside PPS 40 B2, Operation And Safety Notes

Page: 12 / 145

12 GB/CY
„
Only use the device in
well-ventilated spaces.
Danger from flying sparks
when plasma cutting:
„
Cutting sparks can cause an
explosion or fire.
„
Keep flammable substances
away from the cutting location.
„
Do not use the plasma cutter
near flammable substances.
„
Cutting sparks can cause fires.
„
Keep a fire extinguisher close
by and an observer should
be present to be able to use it
immediately.
„
Do not carry out plasma
cutting on drums or any other
closed containers.
Danger from arc beams:
„
Arc beams can damage your
eyes and injure your skin.
„
Wear a hat and safety goggles.
„
Wear hearing protection and
high, closed shirt collars.
„
Use a welding safety helmet
and make sure that the filter
setting is correct.
„
Wear complete body
protection.
Danger from
electromagnetic fields:
„
Cutting current generates
electromagnetic fields.
„
Do not use if you have a
medical implant.
„
Never wrap the cutting cable
around your body.
„
Guide cutting cables together.
z
Welding shield-specific
safety instructions
„
With the help of a bright light
source (e.g. lighter) examine
the proper functioning of the
welding shield prior to starting
with any cutting work.
„
Cut spatters can damage the
protective screen. Immediately
replace damaged or scratched
protective screens.
„
Immediately replace damaged
or highly contaminated or
splattered components.
„
The device must only be
operated by people over the
age of 16.
„
Please familiarise yourself
with the cutting safety
instructions. To that end, you
must also observe the safety
instructions of your plasma
cutter.
„
Always wear a welding helmet
while welding and plasma
cutting. If it is not used, you
could sustain severe lesions to
the retina.
Safety instructions
327358_Plasmaschneider_PPS_40_B2_content_LB7.indb 12 13.09.2019 08:42:44