Parkside PHDP 180 C2, Translation Of The Original Instructions, Page: 40 / 338

GB MT
40
4.
Roll the high-pressure hose around the
hose reel (5).
5. Store the mains connection cable in the
holder (11) provided.
Troubleshooting
The following table will assist you in fixing faults:
Problem Possible cause Error correction
On/Off switch (32) turned
off
Check the position of the
On/Off switch
No mains power supply Check the socket, mains con-
nection cable, plug and fuse
and have them repaired by a
qualified electrician if neces-
sary.
Device does not work
Incorrect voltage supply Check whether the electrical
system matches the informa-
tion on the type plate
Turn the device on and press
the switch lever (17).
Device does not convey wa-
ter
Air locks in the pressure
washer
Bleeding, p. 38
Air locks in the pressure
washer
Bleeding, p. 38 No pressure in device
Pressure loss in line Check the water supply
Connections not correctly in-
stalled
Turn off the device and dis-
connect it from the mains. Re-
connect the device to the wa-
ter supply (see Establishing a
water supply, p. 34 )
Water system leaky
Water connection (28) leaky Turn off the device and dis-
connect it from the mains.
Change the quick connect-
or for the garden hose (29)
including sealing ring (see
Spare parts and accessor-
ies, p. 43 )