Parkside PDTS 6.3 A1, Operation And Safety Notes

Page: 7 / 101

GB/IE/NI
7
Introduction / Safety instructions for pneumatic tools
Vibrations
(under ISO 28927-4): 6.41 m/s
2
Uncertainty K: 1.16 m/s
2
z z
Delivery contents
1 × pneumatic angle grinder
1 × parting disc
1 × assembly key
1 × 1/4" Allen key
1 × compressed air connection
z
Safety instructions for
pneumatic tools
BEFORE USE, PLEASE READ
FIRST THE OPERATING
INSTRUCTIONS CAREFULLY.
THESE FORM PART OF THE DEVICE
AND MUST BE AVAILABLE AT ALL
TIMES!
The use of pneumatic
tools must comply with fundamental
safety precautions serving to rule out
all risks of fire, electric shock, and
injury. Before first use, please read
and observe without fail the informa-
tion in these operating instructions,
and keep these in a safe place.
The manufacturer accepts no liability
for any damage or injury incurred
through failure to observe these
operating instructions.
The specified
hazards are foreseeable risks
associated with the general use of
handheld pneumatic angle grinders.
Nevertheless, the user must also
assess specific risks that may arise
as a result of each and every use.
DANGER OF INJURY!
Shut off the compressed air supply
before changing tools and before
configuration and maintenance work.
EXPLOSION HAZARD!
z „
Never use petrol or other flamma-
ble fluids to clean the pneumatic
device! Sparking may ignite any
vapours trapped in the pneumatic
device and cause it to explode.
Do not work with the device in a
potentially explosive environment
where there are flammable
liquids, gases, or dusts.
Do not process materials that are
or may become easily flammable
or explosive.
GENERAL SAFETY RULES
z †
For multiple hazards: The safety
instructions must be read and
understood before configuration,
operation, repair, maintenance,
292193 Druckluft-Trennschleifer_content_LB6.indb 7 01.12.17 09:56