GB/IE/NI
12
Safety instructions for pneumatic tools
HAZARDS FROM DUST AND
VAPOURS
z
The dusts and vapours generated
by pneumatic angle grinders may
be detrimental to health (e.g.
cancer, birth defects, asthma,
dermatitis). These risks must be
assessed without fail and the cor-
responding regulating
mechanisms implemented.
z
This risk assessment should extend
to the dusts generated by the
machine in use and to the
potential raising of dust deposits.
z
The pneumatic angle grinder
must be operated and serviced as
recommended in these instructions
if the release of dust and vapours
is to be minimised.
z
The exhaust air must be extracted
in such a manner that the dust
raised in dusty environments is
reduced to a minimum.
z
If dusts and vapours are gener-
ated, the main task is to check
these at the place of their release.
z
All machine fitted installations or
accessories designed to capture,
extract, or suppress airborne dust
or vapours should be used and
serviced in accordance with the
manufacturer’s instructions.
z
The consumables / machine tools
must be selected, serviced, and
replaced in compliance with the
recommendations in these
instructions if there is to be no
unnecessary increase to dust and
vapour levels.
z
Use respirator equipment as
set down in your employer’s
instructions or in the work and
health protection rules.
z
Processing certain materials may
emit dust and vapours that in
turn may lead to a potentially
explosive environment.
HAZARDS FROM NOISE
z
The effects of high noise levels
may cause permanent damage to
hearing when there is inadequate
protection. This may lead to loss
of hearing and other problems,
e.g. tinnitus (ringing, buzzing,
whistling, or humming in the ears).
z
These risks must be assessed with-
out fail and the corresponding
regulating mechanisms
implemented.
z
Regulating mechanisms suitable
for minimising risks include
e.g. the use of insulating materials
that suppress ringing noises on the
workpieces.
z
Use hearing protection equipment
as set down in your employer’s
instructions or in the work and
health protection rules.
292193 Druckluft-Trennschleifer_content_LB6.indb 12
01.12.17 09:56
Summary of Contents for PDTS 6.3 A1
Page 3: ...A B C 4 3 2 7 8 1 5 6 9 292193 Druckluft Trennschleifer_cover_LB6 indd 5 01 12 17 10 06...
Page 4: ...292193 Druckluft Trennschleifer_cover_LB6 indd 6 01 12 17 10 06...
Page 34: ...DK 34 292193 Druckluft Trennschleifer_content_LB6 indb 34 01 12 17 09 56...
Page 84: ...FR 84 292193 Druckluft Trennschleifer_content_LB6 indb 84 01 12 17 09 56...