Parkside PDBS 1800 A1, Translation Of The Original Instructions

Page: 6 / 84

PDBS 1800 A1
GB
│
CY
│ 3 ■
Technical specifications
Rated air pressure max . 6 .8 bar
Air consumption 720 l/min
Max . rotation speed max . 1800 rpm
Tool fitting max . Ø 10 mm
(wheel-rim chuck)
Noise emission values
Noise measurement determined in accordance
with ISO 15744
Sound pressure level
L
pA
= 87 .9 dB (A)
Uncertainty K
pA
= 3 dB
Sound power level L
WA
= 98 .9 dB (A)
Uncertainty K
WA
= 3 dB
Wear hearing protection!
Vibration emission value
Vibration values determined in accordance with
ISO 28927-5 and EN 12096:
a
h
= 0 .98 m/s
2
Uncertainty K = 0 .59 m/s
2
WARNING!
► The noise emission levels specified in these
instructions have been measured in ac-
cordance with the standardised measuring
procedure specified in ISO 15744 and can
be used to make equipment comparisons .
The noise emission values vary in accordance
with the use of the compressed-air tool and
may be higher than the values specified in
these instructions in some cases . It is easy to
underestimate the noise emission load if the
compressed-air tool is used regularly in a
certain manner .
NOTE
► For an accurate estimate of the noise emission
load during a certain working period, the
times during which the tool is switched off or
is running but not actually being used must
also be taken into consideration . This can
significantly reduce the noise emission load
over the total working period .
WARNING!
General safety
instructions for
compressed-air tools
WARNING!
► Read all safety warnings and all instruc­
tions.
Failure to follow the warnings and
instructions may result in electric shock, fire
and/or serious injury .
NOTE
► The terms “compressed-air tool" or "tool"
used in the following text refer to the com-
pressed-air tools specified in these operating
instructions .
Save all warnings and instructions for future
reference.
■ The user must evaluate the specific risks that
may arise due to different kinds of use .
■ Please ensure that you have read and under-
stood the safety instructions before fitting,
operating, repairing, servicing or replacing
any accessories and before working near the
compressed-air tool . Failure to do this can result
in serious bodily injury .
■ The compressed-air tool should only be set up,
adjusted or used by adequately qualified and
trained operators .
■ The compressed-air tool may not be modified .
Modifications can reduce the effectiveness of
the safety measures and increase the risks for
the operator .