Parkside 339966-1910, Translation Of The Original Instructions

Page: 27 / 147

PDFW 120 A2 GB
│
IE
│
23 ■
Fig. D:
Shaft
Centring flange
Tension disc
Union nut
Attachment for the flexible shaft
Fixing screw
Protective cover
Fig. F:
Drill holes
* pre-assembled
Package contents
Check the package contents immediately
after unpacking the appliance
1 double bench grinder with flexible drive shaft
PDFW 120 A2
Grinding disc: Ø75 x Ø10 x 20 mm/#120
Buffing disc: Ø75 x Ø10 x 20 mm/#400
Flexible shaft: 1 metre
1 combination spanner
2 tool rests
2 knurled screws
–
Mounting material: 2 x nuts M6
2 spark deflectors
–
Mounting material: 4 x nuts M4,
4 x bolts M4 x 10 mm, 4 x Ø4 washers and
4 x Ø4 spring washers
2 eye shields (pre-installed)
–
Mounting material: 2 x nuts M5,
2 x bolts M5 x 45 mm, 2 x Ø5 washers and
2 x Ø5 spring washers
12 cutting discs 32 x 1 mm
5 abrasive belts 13 mm, Ø15 mm
5 abrasive belts 13 mm, Ø9 mm
5 polishing felts, Ø25 x 7 mm
5 polishing felts, Ø13 x 7 mm
40 cutting discs, Ø24 mm, in small plastic
container
10 pencil grinders
5 milling cutters
4 cleaning brushes
3 brass brushes
2 work arbors for abrasive belts
2 work arbors for polishing felts/cutting discs
1 dressing stone, 20 x 10 x 10 mm
1 polishing paste
3 collet chucks for the flexible shaft
(2.0 - 2.4 - 3.2 mm (pre-assembled))
Wooden storage box
1 set of operating instructions
Technical data
Rated voltage 230 V ∼, (AC)
50 Hz
Rated power consumption 120 W
Protection class II /
(double insulation)
Rated idle speed n
0
0–11500 rpm
Circulation speed 45 m/s
n
0
0–11500 rpm
V 45 m/s
Weight (incl. accessories) ca. 2.4 kg
Grinding discs/buffing discs
D Ø max. 75 mm
d Ø10 mm
t 20 mm
Outer diameter Ø75 mm
Minimum outer diameter Ø50 mm
Bore Ø10 mm
Thickness 20 mm
Hardness grade M
Grain # grinding disc 120
Grain # buffing disc 400