GB
│
IE
│
NI
│
15
■
PDRS 6.3 B2
■
When aids are needed to absorb the reaction torque, we recom-
mend using a suspension unit wherever possible . If this is not pos-
sible, side handles for machines with a straight grip and machines
with pistol grip are recommended . We recommend always using
aids to absorb the torque if it is higher than 4 Nm on machines
with straight grips, and higher than 10 Nm on machines with a
pistol grip, and higher than 60 Nm on offset screwdrivers .
■
Release the start/stop control in case of a disruption to the elec-
tricity supply .
■
Use only the lubricants recommended by the manufacturer .
■
Fingers might be crushed in nut wrenches with an open pan
head .
■
Keep your hands away from the rotating collet chuck and the
rotating drill .
■
Do not use the tool in confined spaces and ensure that your
hands are not crushed between the machine and the work piece,
especially when removing screws .
Hazards caused by repetitive movements
■
Users of an automatic screwdriver may experience unpleasant
sensations in their hands, arms, shoulders, neck area or other
body parts while working with the tools .
■
Assume a comfortable position when working with this machine,
pay attention to safe footing and avoid unfavourable positions
or such that make it difficult to keep your balance . During work
over longer periods, the operator should change posture to avoid
discomfort and fatigue .
■
If the operator notices symptoms such as persistent discomfort,
throbbing, pain, tingling, burning or stiffness, these warning in-
dications should not be ignored . The operator should consult a
qualified medical doctor .
Summary of Contents for 315475
Page 3: ......
Page 35: ... 32 GB IE NI PDRS 6 3 B2 ...
