![background image](http://html.mh-extra.com/html/parkside/315475/315475_translation-of-the-original-instructions_758323013.webp)
■
10
│
GB
│
IE
│
NI
PDRS 6.3 B2
■
Replace a damaged hose immediately . A defective supply line
can cause a compressed air hose to thrash about and cause
personal injury .
■
If the power cable of this tool is damaged, it must be replaced by
the manufacturer or its customer service or by a similarly qualified
person in order to avoid hazards .
■
Do not use the tool if you are tired or under the influence of
drugs, alcohol or medication .
A moment of inattention when operating the tool can result in
serious personal injury .
■
Do not breathe in the exhaust air directly . Avoid getting exhaust
air in your eyes . The exhaust air from the compressed air tool can
contain water, oil, metal particles or dirt from the compressor . This
can cause damage to health .
WARNING!
►
BE CAREFUL WHEN PUTTING DOWN THE TOOL! Always
put the tool down in such a way that it does not lie on the trig-
ger . Under certain circumstances, this might cause an acciden-
tal activation of the tool, which in turn might lead to hazards .
■
Only suitable accessories may be used . You can purchase these
from the manufacturer . Accessories other than original equipment
can cause hazards .
■
Use only filtered and regulated compressed air . Dust, caustic
fumes and/or moisture can damage the motor of a compressed
air tool .
■
The hose must be designed for min . 6 .3 bar or 125 psi, at least
for 150% of the maximum pressure generated in the system .
■
The tool and the supply hose must be fitted with a hose coupling
that allows the pressure of the coupling hose to be dispersed
completely during disconnection .
Summary of Contents for 315475
Page 3: ......
Page 35: ... 32 GB IE NI PDRS 6 3 B2 ...