![background image](http://html.mh-extra.com/html/parkside/315475/315475_translation-of-the-original-instructions_758323012.webp)
GB
│
IE
│
NI
│
9
■
PDRS 6.3 B2
■
Do not overreach . Keep proper footing and balance at all times .
This provides for better control over the compressed air tool in
unexpected situations .
■
Do not use the tool if its switch is defective . Any tool that cannot
be switched on or off is dangerous and must be repaired .
■
Keep compressed air tools that are not being used out of the
reach of children . Do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool . Compressed
air tools are dangerous in the hands of inexperienced users .
■
Treat the tool with care . Check whether moving parts function
correctly and do not jam; check whether any parts are broken or
damaged to an extent that the power tool will no longer operate
correctly . If damaged, have the tool repaired before use . Many
accidents are caused by poorly maintained tools .
■
Switch off the appliance when not in use .
■
Use personal protective equipment . Always wear eye protection .
Wearing protective equipment such as a dust mask, non-slip safe-
ty shoes, a helmet or hearing protection depending on the type
and use of the compressed air tool reduces the risk of personal
injuries .
■
Check all connections and supply lines . All maintenance units,
couplings and hoses must correspond to the appliance parame-
ters in terms of pressure and air flow . If the pressure is too low, the
function of the tool will be compromised and if the pressure is too
high, this can cause property damage and personal injury .
■
Protect the hoses against kinking, constriction, solvents and sharp
edges . Keep hoses away from heat, oil and rotating parts .
■
Ensure that the hose clamps are always tightened firmly . Loose
or damaged hose clamps can allow air to escape in an uncon-
trolled manner .
Summary of Contents for 315475
Page 3: ......
Page 35: ... 32 GB IE NI PDRS 6 3 B2 ...