If the ignition system doesn't work there may be a fault with the
electrical supply. First, check the socket by trying out another piece of
electrical equipment in it , if that works correctly renew the fuse in the
plug.
If the fuse keeps failing there is a fault in the cooker which must be
put right. Do not use a fuse with a rating higher than 3 amps. Do not
carry out other electrical work. Unplug the cooker and tell your installer.
Reversing the main oven door
You can turn the oven door around so that it opens on the other side.
Your supplier can arrange this.
Replacing the oven light bulb
You need a 25 Watt small Edison screw with
a temperature rating of T300.
l
Make sure the cooker is cool before you
replace a bulb.
l
Unplug the cooker.
l
Open the oven door and remove the
oven shelves.
l
Pull the glass bulb cover towards you
and then pull it off.
l
Unscrew the bulb by turning it to the left.
l
Fit a new bulb and then replace the glass
bulb cover.
l
Replace the oven shelves
l
Plug the cooker back into the electricity
supply.
The oven light bulb is not covered by the manufacturers guarantee.
R E N O W N 5 5 G X
31
General information
