Operating the Gate
PF9500A
1.Before attempting the steps outlined below please obey common sense and make sure that you have
closed the passage the Gate will inhibit provided a diversion and informed site inc pedestrians.
2.
3.
4.
Follow the manual release guide in this manual and make sure the Gate moves un-hindered by inserting
the winding handle and turning to make the Gate open and then close.
If the above step is ok then proceed to close the Gate using the manual method and then power on
using the isolator switch as shown (if fitted).
Now read the steps below to move the gate automatically.
1.
2.
3.
4.
When the Key is inserted fully
into the centre hole turn
clockwise to open and anti-
clockwise to close. After this
you must remove the manual
release handle.
Off
On
If an isolator is fitted
turn the knob
clockwise to power
on the Gate.
First Operation Manoeuvres
ROAD
CLOSED
(not fitted as standard optional)
7
There are many options to operate the gate as it is dependant upon which type of access control you have
connected. However there is a standard way to operate the gate by using the key switch and the dead
man button. Instructions are assisted by pictures below.
1.Picture shown below is the key switch and deadman button located on the gate tower (auto model only), also the
key switch keys.
2.To stop the gate dead, press the red button in toward the gate as illustrated.
3.
4.
To reset the button afterwards, to resume normal operation, twist the red button to the right until you feel it “pop”
back out.
To override the gates movement place the key in the key switch, as illustrated, then turn the key in the direction
you wish the gate to travel. Note this is momentary so you have to keep the key turned in the position of travel.
1.
2.
3.
4.
Key switch
keys
Control housing mounted
on the front door
Key switch
Dead-man
button
“Click”
Key inserted
into slot
When you turn the key to
the left and keep turned the
gate moves left, turn to
the right and keep turned
the gate moves right.
Summary of Contents for PF9500A
