Parker TM Series, Technical Manual

Page: 96 / 129

96 - PVD 3622_GB_TM_January 2014.Docx
3.8.4.1. Ground connection
DANGER: For safety reasons, you need to connect motor to the
ground.
Consult the local regulations to choose the right cross section and to
know the resistance limits to check ground continuity between frame
and ground wire.
3.8.4.2. Shaft Height 200 mm
U, V, W : M8 pins for Power Connection
1: KTY (Brown)
2: KTY Sensor
– (White)
3: PTC 150°C Thermal Probe (Black)
4: PTC 150°C Thermal Probe (Black)
5: PTC 140°C Thermal Probe (White)
6: PTC 140°C Thermal Probe (Blue)
GND:
M8x15 screw on terminal box
And M10 on rear flange
Power Accessories
Tightening torque 17 N.m 0,6
– 0,8 N.m
Cables section capacity 35 to 95 mm² 0,2 to 4 mm²
3.8.4.3. Shaft Heights 315 and 400 mm with current < 320A
– cable
cross section: 95 to 185mm² max and 320 < current < 560A
–
cable cross section: 150 to 300mm²
U, V, W : Clamp Power Connection
1: KTY (Brown)
2: KTY Sensor
– (White)
3: PTC 150°C Thermal Probe (Black)
4: PTC 150°C Thermal Probe (Black)
5: PTC 140°C Thermal Probe (White)
6: PTC 140°C Thermal Probe (Blue)
GND:
4 holes Ø10.5mm on terminal box
And M8 on rear flange (TM 315)
M12 on rear flange (TM 400)
Power Accessories
Tightening torque 30 N.m 0,6
– 0,8 N.m
Cables section
capacity
95 to 185 mm² (320 A)
150 to 300 mm² (450 and 560 A)
0,2 to 4 mm²