Parker TM Series, Technical Manual

Page: 120 / 129

120 - PVD 3622_GB_TM_January 2014.Docx
Step 5 : Belt tension adjustment.
1
– Adjust the belt tension by moving the encoder
support in the direction specified by .
Effort : F = 50N (

10N)
Tighten screws at 5 Nm
Control frequency :
see Table 1 below
(BINDER accessory : SM4 tension controller)
2 - Execute the encoder calibration procedure :
adjustment of the encoder position to the rotor
position done from the drive.
Table1 : Belt references and control frequencies
BINDER references PARKER references Frequency :
TMW 40_ 6AT3 / 816 350012P0001 194 to 215 Hz
TMW 30_ 6AT3 / 639 350112P0001 307 to 340 Hz
TMW 20_ 6AT3 / 450 350212P0001 358 to 403 Hz
ENCODER REPLACEMENT
Step 1 : Encoder Disassembly
1
– Remove the rear cover .
2
– Remove the encoder axial holding
screw .
3
– Unscrew the pointed screw
(encoder radial positioning).
1
F
2
2
1
F
2
3
4
2
3
4