➃
Troubleshooting • OEM750
58
Problem Isolation
When your system does not function properly (or as you
expect it to operate), the first thing that you must do is iden-
tify and isolate the problem. When you accomplish this, you
can effectively begin to resolve and eradicate the problem.
The first step is to isolate each system component and ensure
that each component functions properly when it is run inde-
pendently. You may have to dismantle your system and put it
back together piece by piece to detect the problem. If you have
additional units available, you may want to exchange them
with existing components in your system to help identify the
source of the problem.
Determine if the problem is mechanical, electrical, or soft-
ware-related. Can you repeat or re-create the problem? Ran-
dom events may appear to be related, but they may not be
contributing factors to your problem.
You may be experiencing more than one problem. You must
isolate and solve one problem at a time. Log (document) all
testing and problem isolation procedures. You may need to
review and consult these notes later. This will also prevent
you from duplicating your testing efforts.
Once you isolate the problem, take the necessary steps to
resolve it. Use the solutions in this chapter. If your system’s
problem persists, contact your local technical support re-
source.
Summary of Contents for OEM750
Page 64: ... Tuning Specifications OEM750 56 ...
Page 90: ...EMC INSTALLATION GUIDE OEM750 OEM750X 82 ...
Page 94: ...INDEX OEM750 86 ...
