manualshive.com logo in svg

Parker LVD1, User Manual, Page: 9 / 99

Share
Download
Parker LVD1 User Manual Download Page 9

Parker Hannifin S.p.A. - Divisione S.B.C.                                                                                LVD User’s Manual 

 

 

9

1.5 Main software specifications 
 

The following functionalities are implemented in the basic software supplied with the 

LVD

 

drive: 

 

• 

Speed control 

• 

Advanced torque limits manager 

• 

Speed windows management 

• 

Positioning with trapezoidal speed profile 

• 

Digital locking functions with variable transmission ratios and phase shifting 

• 

Spindle orientation 

• 

Stepper motor simulation 

• 

Torque control with superimposed speed control 

• 

Acceleration ramp control with superimposed speed control 

• 

Simplified maintenance and start-up mode 

• 

Built-in PLC for advanced input/output programming functions 

 
 
 

1.6 Compliance with EMC standards 
 

Immunity: 
 
EN50082-1* / EN50082-2    

 

 

Basic immunity specifications 

IEC1000-4-2  (ex IEC 801-2)        

level 3  

Electrostatic discharge immunity 

IEC1000-4-3  (ex IEC 801-3) 

level 3  

Electromagnetic field immunity 

IEC1000-4-4  (ex IEC 801-4) 

level 4  

Fast transient burst conducted immunity 

 
Compatibility: 
 
EN50081-1* / EN50081-2 

 

Basic radio interference specifications 

EN55011  group 1, class A 

 

Measurement limits for radio interference 

EN55011  group 1, class B*   

Measurement limits for radio interference 

 
 

1.7 Safety 
 

Safety standard 

 

 

EN60065, EN50178 

 

Low voltage directive  

73/23/EEC amended by 93/68/EEC 

Applied standard 

 

EN60204-1 

 
 

* Conformity for use in domestic or industrial surroundings depends on the nature of the installation.

Summary of Contents for LVD1




































































































Reviews:

No comments