55
Parker Hannifin Corporation
Hydraulic Pump/Motor Division
Greeneville, Tennessee USA
HY13-1524-002-M1/US
Assembly
Service Manual
HTG Series Integrated Hydrostatic Transmission
HY13-1528-001-M1/US—HTG Series Service Manual
Reassembly
Step
Instruction
Illustration
Install commutator.
Place commutator over the end of drive link
onto manifold with seal ring face side up
Install commutator ring.
Install section seal in end cover.
Install end cover O-ring.
Install end cover on top of
motor.
Place commutator ring on top of manifold
and align the holes up with the bot holes of
housing.
NOTE:
Reference the V-Pattern previously
marked on commutator ring.
Apply clean grease to a new section seal
and install it into the seal ring groove of the
end cover.
Place O-ring over the end cover and into
groove.
Align bolt holes.
Install two end cover flow port
O-rings.
1. Apply clean lubricant to both O-rings and
place them in the end cover grooves.
