54
Parker Hannifin Corporation
Hydraulic Pump/Motor Division
Greeneville, Tennessee USA
HY13-1524-002-M1/US
Assembly
Service Manual
HTG Series Integrated Hydrostatic Transmission
HY13-1528-001-M1/US—HTG Series Service Manual
Reassembly
Step
Instruction
Illustration
Install rotor thrust washer.
1. Place thrust washer over the tip of the
drive link and into the rotor counter bore.
2. Washer should fit flush with top of rotor.
Install section seal ring into
manifold.
Install manifold.
Install section seal.
Assemble seal and
commutator.
1. Place manifold over the drive link and
onto the rotor set (seal facing rotor set).
2. Reference V-pattern previously marked
on manifold and align bolt holes.
Apply clean grease to a new section seal
and install in the seal ring groove on the
manifold face with trapezoid-shaped flow
holes.
Apply clean grease to a new section seal
and install it in the seal ring groove of
manifold.
Assemble new commutator seal, flat side up,
into commutator groove.
