46
Parker Hannifin Corporation
Hydraulic Pump/Motor Division
Greeneville, Tennessee USA
HY13-1524-002-M1/US
Assembly
Service Manual
HTG Series Integrated Hydrostatic Transmission
HY13-1528-001-M1/US—HTG Series Service Manual
Reassembly
Step
Instruction
Illustration
Install cradle bushings.
Install control block.
4. Make sure bushings are set in place.
1. Align cradle bushing pin hole to pin loca-
tion in top housing.
2. Do not stake pins.
3. Apply HT-1000™ oil on top of each
cradle bushing.
Install control block onto trunnion arm inside
of top housing
Install swash block.
1. Apply HT-1000™ oil onto washers in
swash block.
2. Assemble swash block – thin washer,
thrust bearing and thick, top washer –
with the swash block.
3. Slide the swash block onto cradle bear-
ings in top housing.
4. Align swash block with control block us-
ing a small flathead screwdriver.
5. Verify the swash block moves freely
back and forth on bushing without bind-
ing or dragging.
