Parker ACR2000, Hardware Manual

Page: 3 / 53

CHANGE NOTICE
ACR2000 Hardware Manual P/N PM08117 Version Change:
From: Version 1.08, Dated 5/24/2000
To: Version 1.09, Dated 12/7/2001
1. Page 11, Digital Output Sink/Source
Select Jumpers (J7 and J8)
Added Sinking Output Driver chip source.
2. Page 26, ACRCOMM Serial
Communications
Corrected MUX Flag table.
3. Page 36, ACR2000 Technical
Specification
Corrected operating temperature range. Added tolerances to
power consumption values.
ACR2000 Hardware Manual P/N PM08117 Version Change:
From: Version 1.07, Dated 9/30/1999
To: Version 1.08, Dated 5/24/2000
1. ACR2000, ACRIO Section Removed ACRIO section. ACRIO board has separate
hardware manual.
ACR2000 Hardware Manual P/N PM08117 Version Change:
From: Version 1.06, Dated 7/8/1999
To: Version 1.07, Dated 9/30/1999
1. Page 5, ACR2000 Motherboard
Hardware
Added U14/U15 Digital Output Driver locations to Figure
1.
2. Page 6, ACR2000 Motherboard
Jumpers
Added jumper reference table.
3. Page 11, ACR2000 Motherboard
Jumpers – Digital Output
Added warning about installing jumpers with wrong output
driver IC’s.
4. Page 25, ACRCOMM Module Added communications set-up details.
5. Page 27, ACRCOMM Hardware Setup Updated outline drawing to include LED’s and unused
jumpers.
6. Page 28, ACRCOMM Module Jumpers Added jumper reference table.
7. Page 30, ACRCOMM Module Jumpers
– Battery Enable Jumpers (J5 and J6)
Added reference and replacement options to first paragraph.
8. ACRCOMM Module Jumpers –
Extended Card Address Jumper (J8)
Removed J8 Jumper Reference information
9. Page 33, ACRCOMM Module
Hardware Wiring – Standalone Power
(PWR2)
Added LED reference to PWR2 table.
10. ACRIO Module Hardware Added U1 thru 4 Digital Output Driver locations to Figure
5.
11. ACRIO Module Jumpers Added jumper reference table.
12. ACRIO Module Jumpers – Digital
Output
Added warning about installing jumpers with wrong output
driver IC’s. Corrected IC reference designations.